STANDARD CLIP UNIBOOT FIBER CORD
The uniboot design allows one cable to carry both fibers, reducing cable congestion when routing. It is designed for high-density fiber patching in data centers that require space-saving solutions and reduced cable management troubles.
(SUNCALL) LC PULL & SWITCHABLE UNIBOOT FIBER CORD
Length: depends
Fiber mode: OS2/OM4/OM3
Cable Diameter: 1.6/2.0/3.0mm
Flame Rating: Riser(OFNR)/LSZH/Plenum (OFNP)
PARAMETERS
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Connector Type | LC UPC to LC UPC | Fiber Count | Duplex |
| Fiber Grade | SMF: G.657.A1; MMF: Bend Insensitive | Cable OD | 1.6/2.0/3.0mm |
| Fiber Mode | OS2/OM3/OM4 | Min. Bend Radius (Core) | SMF: 10mm; MMF: 7.5mm |
| Durability | 1000 Cycles | Min. Bend Radius (Cable) | 10/5D (Dynamic/Static) |
| Insertion Loss | ≤0.3dB | Tensile Strength | 60/100N (Long/Short Term) |
| Return Loss | ≥50dB | Cable Jacket | Riser (OFNR)/LSZH/Plenum (OFNP) |
| Attenuation (1310nm) | 0.4 dB/km | Operating Temp. | -10~70°C |
| Attenuation (1550nm) | 0.25 dB/km | Storage Temp. | -20~70°C |
Three Jacket Materials Used in Diverse Cabling Zone
